Elinchrom Port Devices Driver

  1. Elinchrom Port Devices Driver
  2. Elinchrom Port Devices Drivers

The Elinchrom Transmitter Pro is compatible with the three previous generations of flash units (including the EL-Skyport Transceiver RX module for Style RX, Digitial RX, and Ranger RX systems, the integrated EL-Skyport modules for D-Lite RX, BRX, ELC Pro HD and ELB series.). Please note, HSS and TTL is only available with the ELB 500 TTL. The package provides the installation files for SAMSUNG Mobile MTP Device Driver version 2.9.201.1018. In order to manually update your driver, follow the steps below (the next steps). The non-PD port attempts to charge the system by using USB Type-C current levels. For more information, see USB 3.1 and USB Type-C specifications. And explains the registers and data structures, for hardware component designers, system builders, and device driver developers. Microsoft provides an in-box driver with Windows, UcmUcsi.sys. USB™ multi-port adapters with Ethernet connectivity and some Ethernet adapters are not compatible at this time (due to IC design). Click here for more information. The display driver does not support Mac® computers with the M1 processor at this time, contact your computer manufacturer to verify if your computer supports the display driver.

-->

This section describes the class-of-device (CoD) registry subkeys and entries that apply to the Bluetooth driver stack.

'COD Major' and 'COD Type' Values

Original equipment manufacturer (OEMs) can use the COD Major and COD Type values to indicate the Class of Device for a Bluetooth-enabled Windows device. After the Bluetooth class installer sets the Class of Device based on these registry values, a remote device can determine whether it is connecting to a portable computer, a desktop computer, a phone, and so on.

The registry path to the COD Major and COD Type values is:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesBTHPORTParameters

Elinchrom Port Devices Driver

Note that setting these values changes the Bluetooth Class of Device for the system, regardless of which Bluetooth radio may be attached. You can set the COD Major and COD Type to DWORD values as defined for the Class of Device field values in the Bluetooth SIG Assigned Numbers.

The Bluetooth profile driver, BthPort.sys, reads the COD Major and COD Type values to determine how it should respond to a device inquiry. These values affect only the COD_MAJOR_XXX and COD_XXX_MINOR_XXX bits of the Class of Device. The COD_SERVICE_XXX bits are not affected by this registry entry.

If the COD Major and COD Type values are not set or are set to invalid values, the Bluetooth class installer will set these values to COD_MAJOR_COMPUTER and COD_COMPUTER_MINOR_DESKTOP, respectively.

Scanning Parameterization Settings

Elinchrom Port Devices Drivers

Profile drivers can specify scanning parameters settings for their device(s) in their profile driver's INF file to tailor to the specific needs of a given device scenario.

You can override the default system scanning parameters by providing one or more of the following scanning parameters listed below into the AddReg directive. More information on how to use this directive can be found in INF AddReg Directive.

Elinchrom
Value NameTypeMin ValueMax Value
HighDutyCycleScanWindowDWORD 0x100010x00040x4000. Shall be equal or smaller than the HighDutyCycleScanInterval parameter
HighDutyCycleScanIntervalDWORD 0x100010x00040x4000
LowDutyCycleScanWindowDWORD 0x100010x00040x4000. Shall be smaller than the LowDutyCycleScanInterval parameter
LowDutyCycleScanIntervalDWORD 0x100010x00040x4000
LinkSupervisionTimeoutDWORD 0x100010x000A0x0C80
ConnectionLatencyDWORD 0x100010x00000x01F4
ConnectionIntervalMinDWORD 0x100010x00060x0C80. Shall be smaller or equal to ConnectionIntervalMax
ConnectionIntervalMaxDWORD 0x100010x00060x0C80

Note

Changes to scanning parameters make a global impact on the performance of the Bluetooth stack. Making changes to scanning parameters programmatically is not permitted. Using Low Duty Cycle scanning parameters that are too aggressive can not only have a negative impact to the available bandwidth for other Bluetooth Low Energy connections, but also for Bluetooth BR/EDR connections.

Support - My Account

Good communication with our customers is essential for Elinchrom.
Opening an Elinchrom account allows you the full benefit of our support service.
In order to offer you as much help and support as possible we ask for your name, contact details and the type of unit you own.
We look forward to help you.


Notice
Elinchrom will not share or use your personal information in ways unrelated to the purpose for which you originally provided it. We will always request your consent before using your information for any other purpose.
Your contact details may be shared with your local Elinchrom Distributor to improve communication and support in general.
More about privacy and user data.