Drivers Hondata Mobile Phones & Portable Devices

If your computer doesn't recognize your connected device, you might see an unknown error or a '0xE' error. If you do, follow these steps and try to connect your device again after each step:

Hondata FlashPro Drivers is a Shareware software in the category Miscellaneous developed by Hondata, Inc. The latest version of Hondata FlashPro Drivers is currently unknown. It was initially added to our database on. Hondata FlashPro Drivers runs on the following operating systems: Android/Windows. 1 Compatible with select phones with Bluetooth ®. Your wireless carrier’s rate plans apply. State or local laws may limit use of texting feature. Only use texting feature when conditions allow you to do so safely. Hondata's new generation programming tool for the 06 - 09 US Civic Si, the Japanese 06-09 Civic Type R and the European 07-09 Civic Type R. A brief introduction. Race Calibration Hondata has developed a Race calibration which allows you to tune with the MAP sensor and bypass the limitations of the AFM sensor. A mobile phone, known as a cell phone in North America, is a portable telephone that can make and receive calls over a radio frequency link while the user is moving within a telephone service area. The radio frequency link establishes a connection to the switching systems of a mobile phone operator, which provides access to the public switched telephone network (PSTN).

  1. Make sure that your iOS or iPadOS device is unlocked and on the Home screen.
  2. Check that you have the latest software on your Mac or Windows PC. If you're using iTunes, make sure you have the latest version.
  3. Make sure that your device is turned on.
  4. If you see a Trust this Computer alert, unlock your device and tap Trust.
  5. Unplug all USB accessories from your computer except for your device. Try each USB port to see if one works. Then try a different Apple USB cable.*
  6. Restart your computer.
  7. Restart your device:
  8. Try connecting your device to another computer. If you have the same issue on another computer, contact Apple Support.

For more help, follow the steps below for your Mac or Windows PC.


* Learn how to connect iPad Pro (11-inch) or iPad Pro 12.9-inch (3rd generation) to your computer.

If you use a Mac

  1. Connect your iOS or iPadOS device and make sure that it's unlocked and on the Home screen.
  2. On your Mac, hold down the Option key, click the Apple menu, and choose System Information or System Report.
  3. From the list on the left, select USB.
  4. If you see your iPhone, iPad, or iPod under USB Device Tree, get the latest macOS or install the latest updates. If you don't see your device or still need help, contact Apple Support.

If you use a Windows PC

The steps differ depending on if you downloaded iTunes from the Microsoft Store or from Apple.

Drivers hondata mobile phones & portable devices am fm

If you downloaded iTunes from the Microsoft Store

Follow these steps to reinstall the Apple Mobile Device USB driver:

  1. Disconnect your device from your computer.
  2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
  3. Click and hold (or right-click) the Start button, then choose Device Manager.
  4. Locate and expand the Portable Devices section.
  5. Look for your connected device (such as Apple iPhone), then right-click on the device name and choose Update driver.
  6. Select 'Search automatically for updated driver software.'
  7. After the software installs, go to Settings > Update & Security > Windows Update and verify that no other updates are available.
  8. Open iTunes.

If you downloaded iTunes from Apple

Follow these steps to reinstall the Apple Mobile Device USB driver:

  1. Disconnect your device from your computer.
  2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
  3. Press the Windows and R key on your keyboard to open the Run command.
  4. In the Run window, enter:
    %ProgramFiles%Common FilesAppleMobile Device SupportDrivers
  5. Click OK.
  6. Right-click on the usbaapl64.inf or usbaapl.inf file and choose Install.
    You might see other files that start with usbaapl64 or usbaapl. Make sure to install the file that ends in .inf. If you’re not sure which file to install, right-click a blank area in the File Explorer Window, click View, then click Details to find the correct file type. You want to install the Setup Information file.
  7. Disconnect your device from your computer, then restart your computer.
  8. Reconnect your device and open iTunes.

If your device still isn't recognized

Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager:

  1. Press the Windows and R key on your keyboard to open the Run command.
  2. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open.
  3. Locate and expand the Universal Serial Bus controllers section.
  4. Look for the Apple Mobile Device USB driver.

If you don't see the Apple Mobile Device USB Driver or you see Unknown Device:

  • Connect your device to your computer with a different USB cable.
  • Connect your device to a different computer. If you have the same issue on another computer, contact Apple Support.

If you see the Apple Mobile Device USB driver with an error symbol:

If you see , , or next to the Apple Mobile Device USB driver, follow these steps:

  1. Restart the Apple Mobile Device Service.
  2. Check for and resolve issues with third-party security software, then restart your computer.
  3. Try to install the usbaapl64.inf or usbaapl.inf file again.
Installed

Hondata Mobile is an App for iOS and Android, which connects your mobile device to your Bluetooth enabled FlashPro, KPro4 or white board S300 V3. The powerful, yet easy to use design of Hondata Mobile enables instant insights anytime into engine operation from your mobile device, from checking and clearing engine codes to monitoring engine sensors.

Hondata Mobile is a standout product in the Honda Tuning market. Designed specifically for Hondata tuning products, Hondata Mobile is an elegant solution for the customer who demands the best in function, ease of use and well-thought-out design.

  • Quickly check and clear error codes
  • Display important engine operating conditions
  • Custom digital displays and analog gauges
  • Programmable Shift Light

Hondata Mobile is supported by the following Hondata products:

Drivers Hondata Mobile Phones & Portable Devices

s300v3 (all)

KPro4 (all)

FlashPro (most after July 6 2013 and all after Jan 1 2014 - see here)

Drivers Hondata Mobile Phones & Portable Devices Wireless

Apple iOS 6 and later

  • iPhone 4s and later
  • iPad 3rd generation and later
  • iPod Touch 3rd generation and later


Apple iOS store

Android 2.2.3 (Gingerbread) and later

There are a variety of free and paid Apps. Not all Apps have been tested. Hondata Mobile supports the Elm 327 protocol, a text based datalogging protocol.

Drivers Hondata Mobile Phones & Portable Devices Bluetooth

Tested Android apps

Phones
  • Car Gauge Lite OBD2
  • Car Gauge Pro (OBD2 + Enhance)
  • OBDAutoDoctor - Car OBD Tool
  • OBD Car Doctor
  • OBD Dashboard (Free)
  • OBD DROIDSCAN PRO
  • OBDLink (OBD car diagnostics)
  • ScanMaster Lite
  • Torque Lite (OBD2 & Car)
  • Torque Pro (OBD 2 & Car)

How do I tell if my FlashPro supports Bluetooth?

Drivers Hondata Mobile Phones & Portable Devices

From July 6 2013, some FlashPros shipped from Hondata include Bluetooth.
From Jan 1 2014, all FlashPros shipped from Hondata include Bluetooth.
Check the compatibility list and software check procedure.

Can I upgrade my older FlashPro for a Bluetooth enabled model?

Yes. For $150 + shipping (around 20% the cost of a new FlashPro), Hondata will upgrade your old FlashPro and give it a 1 year warranty. Download the upgrade form.

Hondata Driver Not Installed

Can I write my own software to access the Hondata data stream over Bluetooth?

The Hondata binary protocol specification is available here.

The ELM327 protocol is available from elmelectronics.com. We also support some ST commands from the STN1110.