Drivers Dataman Programmers USB Devices

The Dataman 48UXP's universal pin driver capability lets it program all 48-Pin DIL devices, including all single-chip Micro-controllers, without DIL-to-DIL adapters The Dataman 48UXP has additional safety. The Dataman 40Pro is a PC based universal 40-pin programmer with ISP capabilities and USB 2.0 connectivity. The 40Pro is built to meet the demands of development labs and field engineers for universal and portable programming. Dataman 40Pro is a small, fast and powerful programmer designed for a huge range of programmable devices. Using the built-in in-circuit serial programming.

DATAMAN-48PRO+
48Pro+ Gang Universal ISP Programmer
DATAMAN
1.DATAMAN-48PRO.pdf (2 pages)
Programmer, Universal
32000
Programmer, Cables, Manual, Software
Universal ISP Programmer, USB Cable, ISP Cable, User Manual, Software
  • Current page: 2 of 2
• USB 2.0 high-speed compatible port, up to 480 Mbit/s transfer rate
• FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
• On-board intelligence: powerful microprocessor and FPGA based state machine
• Three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
• VPP1, VPP2 range 0..26V/1A
• Protection against surge and ESD on power supply input and parallel port
• Banana jack for connection to ground
• 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices
Drivers Dataman Programmers USB Devices
• VCCP/VPP1/VPP2 can be connected to each pin
• FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
• Analog pindriver output level selectable from 1.8V up to 26V
• Current limitation, overcurrent shutdown, power failure shutdown
• ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
• Continuity test: each pin is tested before every programming operation
• 20-pin male type with missinsertion lock
• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable
• 1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins
• Programmed chip voltage (VCCP) with both source/sink capability and
• 1x VPP voltage (range 2V..25V/50mA), can be applied to six pins
• Target system supply voltage (range 2V..6V/250mA)
• ESD protection on each pin of ISP connector (IEC1000-4-2: 15kV air, 8kV
• Two output signals, which indicate state of work result = LED OK and LED
• Input signal, switch YES! equivalent (active level: max. 0.8V)
User Interface
• Programmer is driven by an easy-to-use control program with pull-down
• Standard device-related commands (read, blank check, program, verify, erase)
• All known data formats are supported. Automatic file format detection and
Dataman Programmers Ltd.
Dorset DT2 0AE, UK
Fax (01300) 321012
up to 48-pin
from 1.8V up to 5V to handle all (low-voltage including) devices
contact)
menu, hot keys and on-line help. Selecting of device is performed by its class,
by manufacturer or simply by typing a fragment of vendor name and/or part
are enhanced by test functions (insertion test, signature-byte check) and
additional special functions (autoincrement, production mode -
programming starts immediately once chip inserted into socket).
IN THE US…
215 East Michigan Avenue
Tel (386) 774-7785
• The rich-featured auto-increment function enables one to assign individual
• The software provides extensive information about programmable devices
• The software provides full information for ISP implementation: Description
• The remote control feature allows the PG4UW software to be flow controlled
• Multiple devices can be programmed and tested via JTAG chain: JTAG chain
• Multiple 48Pro+ programmers can be connected to the same PC (via USB
The Dataman 48Pro+ supports over 32,000 of the most popular devices in use
today - with future devices being added monthly. Dataman 48Pro+ coverage
Programmer (ZIF Socket)
1-Wire E(E)PROM, BI-PROM, Configuration (EE)PROM, CPAL, EEPROM, EPROM,
EPLD, Flash, Flash EPROM, FPGA, GAL, MACH, Microcontrollers, MROM, NV RAM,

Dataman Software Download

Programmer (ISP Connector)
Package Includes:
• Moulded USB Cable
• Diagnostic POD for selftest of the programmer
• Diagnostic POD for selftest of the ISP connector
• User manual
• Optional range of adapters and socket converters also available
• 30 day money back guarantee* - If you don't like it, send it back
• Three year guarantee - Three years parts and labour warranty, on the 48Pro+
• Life-Time Technical Support - 48Pro+ technical support is available free via
• Life-Time Software Updates - 48Pro+ software updates are available free via
Available from…
serial numbers to each programmed device - or simply increments a serial
number, or the function enables one to read serial numbers or any
programmed device identification signatures from a file.
including detailed drawings of all available packages. The software also

Drivers Dataman Programmers Usb Devices 3.0

provides explanations of chip labelling (prefixes and suffixes) for each of the
of ISP connector pins, recommended target design and other necessary
by another application - either using .BAT file commands or DLL file
(ISP-Jam) or JTAG chain (ISP-VME).
port) achieving an extremely powerful multiprogramming system, supporting
as many devices as a single 48Pro+ programmer and without a noticeable
decrease in programming speed. Concurrent multiprogramming is also
supported allowing each programmer to work independently increasing
Dimensions: 195 x 140 x 55mm (7.7 x 5.5 x 2.2inches)
Operating voltage: 110-250V AC
Power consumption: max. 20W active / approx. 2W sleep
our website and telephone helpdesk for life
www.dataman.com

Drivers Dataman Programmers Usb Devices Pc Camera

Category: System and controllers
Manufacturer: DataMan
Caution Level: safe
Download File Size: N/A
Operating System: Windows 98/2000/2003/XP
Latest Version / Release Date: N/A / N/A

Windows device driver information for DataMan base unit COM port

The DataMan base unit COM port is a 48 pin driver programmer that is PC based that has ISP capabilities. It has USB 2.0 and parallel connectivity. It performs contact and insertion tests and helps prevent chip damage. It also has built in protections circuits that help avoid any damage to the programmer. The programmed chip voltage has voltage senses and includes a 10 pin with misinsertion lock. It contains a ZIF socket pindriver that has 48 pindrivers. The ISP is capable of using a JTAG interface. It performs self tests and the base unit has three D/A converters for VPP1, VPP2 and VCCP. It uses very user friendly software that has standard device related commands. It measures 160 mm by 190 mm by 42 mm and weighs 0.9 kg. it comes with a power supply adaptor with an input of 100-240 volts.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The user can assign serial numbers to each device that is programmed and it provides full information regarding ISP implementation. It contains onboard intelligence and supports over 32000 devices. It comes with an ISP cable, a molded USB cable, a diagnostic POD for self test, an antidust cover for the ZIF socket and a user manual. It has USB 2.0 and parallel connectivity. It performs contact and insertion tests and helps prevent chip damage. It also has built in protections circuits that help avoid any damage to the programmer. The programmed chip voltage has voltage senses and includes a 10 pin with misinsertion lock. It contains a ZIF socket pindriver that has 48 pindrivers. The ISP is capable of using a JTAG interface. It performs self tests and the base unit has three D/A converters for VPP1, VPP2 and VCCP. It is highly recommended you run a free registry scan for Windows and DataMan base unit COM port errors before installing any driver updates.