Download Drew Port Devices Driver

The best place to download a driver is direct from the hardware manufacturer. Before you can update a driver, you'll need to find and download the latest version. Drivers downloaded from the manufacturer will be the most tested and up to date available. In a driver pair, one driver handles general tasks that are common to a whole collection of devices, while the other driver handles tasks that are specific to an individual device. The drivers that handle device-specific tasks go by a variety of names, including miniport driver, miniclass driver, and minidriver.

This article describes an issue that occurs when you use a FireWire port-based device in Windows 8.1 or Windows 8. Additional steps of configuration is required to enable this update after the installation.

The Device Install Kit download site does not provide access to all Emerson Process Management device files. Device files distributed on DeltaV and AMS Device Manager release media are not duplicated for download from this site. COMPortAssignment is a free utility that is used for assigning the COM Port numbers of FTDI devices. It runs under Windows XP, Vista and Windows 7. COMPortAssignment utility is available for download as a.zip file by clicking here. Download the latest drivers, firmware, and software for your HP OfficeJet 4650 All-in-One Printer.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.

Symptoms

Assume that you have a computer that equips with an IEEE 1394 FireWire controller card. After you upgrade the computer from Windows 7 to Windows 8.1 or Windows 8, devices that connect to the computer by using a FireWire port do not work.

Cause

This issue occurs because the legacy 1394 bus drivers (1394bus.sys and Ochi1394.sys) are removed in Windows 8.1 or Windows 8.

Resolution

Update information

How to obtain this update

Microsoft Download Center

The following files are available for download from the Microsoft Download Center:

Operating system

Update

All supported x86-based versions of Windows 8.1 or of Windows 8

All supported x64-based versions of Windows 8.1 or of Windows 8

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Additional steps of configuration requirement

After you install the 1394 OHCI Legacy Driver.msi file, follow these steps:

Download
  1. Right-click the Legacy1394.inf file under one of the following paths based on the computer's architecture:

    • C:Program Files1394 OHCI Compliant Host Controller (Legacy)x86_driver

    • C:Program Files1394 OHCI Compliant Host Controller (Legacy)x64_driver

  2. Click Install.

  3. Open Device Manager in Control Panel.

  4. Expand IEEE 1394 Bus host controllers, and then locate the host controller.

  5. Right-click the host controller, and then click Update Driver Software.
    The screen shot of the host controller and the Update Driver Software is listed in the following example:

  6. Click Browse my computer for driver software.

  7. Click Let me pick from a list of device drivers on my computer.

  8. Click Generic1394 OHCI compliant host controller (Legacy), and then click the Next button.

  9. Click the Close button.


Port

Prerequisites

There are no prerequisites for installing this update.

Registry information

To apply this update, you do not have to make any changes to the registry.

Restart requirement

You have to restart the computer after you apply this update.

Update replacement information

This update does not replace a previously released update.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Free Device Driver

Windows 8.1 and Windows 8 file information notesThe MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are not listed

For all supported x86-based versions of Windows 8.1 or of Windows 8

File name

File version

File size

Date

Time

Platform

1394_ohci_legacydriver.msi

Not Applicable

208,896

15-Aug-2014

20:48

Not Applicable

For all supported x86-based versions of Windows 8.1 or of Windows 8

File name

File version

File size

Date

Time

Platform

1394_ohci_legacydriver.msi

Not Applicable

208,896

15-Aug-2014

20:48

Not Applicable


Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the 'Applies to' section.

More Information

Steps of uninstalling the 1394 OHCI Legacy Driver.msi file

  1. Open Control Panel in the Category view.

  2. Click Uninstall a program in Control Panel.

  3. Right-click 1394 OHCI Compliant Host Controller (Legacy), and then click Uninstall.
    The screen shot of uninstalling the 1394 OHCI Compliant Host Controller (Legacy) is listed in the following example:

Additional package information

  • This driver is only intended to work with legacy 1394 host controllers. Therefore, you may experience lower transfer data rates than the 1394b driver.

  • The driver is intended to resolve compatibility issues for 1394 peripherals on 1394b systems. If you are not experiencing these issues, you should continue to use inbox drivers that are provided in Windows 8.1 or Windows 8.

  • You have to reinstall this stand-alone driver package if you upgrade to a newer operating system version in the future.

Download Drew Port Devices Driver Wanted


For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

The new Intel Android* USB Driver package 1. 9.0 is available for download at the Intel Developer Zone. It enables you to connect your Windows*-based machine to your Android* device that contains an Intel® Atom™ processor inside. This includes the latest Intel® Atom™ x3 and x5 processor families and supported host systems with Windows* 8.1 (32/64-bit) and Android devices including those with Android* 4.4 – Kit Kat and Android* 5.x – Lollipop.

USB drivers for Android devices are platform-specific, and there is no guarantee that this Intel USB driver will work for every OEM device. Since most OEMs develop the USB driver for all devices that they sell, we recommend that you also check out the Android* OEM USB driver page that lists the OEM drivers.

This installation instructions document will guide you through installing the Intel® Android* USB Driver package which will enable you to connect your Windows* based machine to your Android device that contains an Intel® Atom™ processor inside.

Supported USB profiles

After installing the USB driver package, plug in your Android* device to your computer using your micro-USB to USB cable. The following are the supported USB profiles via the Intel Android USB Driver package:

  • ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory to use in order to re-flash, and debug.
  • MTP (Media Transfer Protocol): This is the Windows* protocol to facilitate the transfer of media files.
  • PTP (Picture Transfer Protocol): This is the Windows* protocol to allow the transfer of images from digital cameras to computers.
  • RNDIS: This provides a virtual Ethernet link using phone network.
  • CDC Serial (Modem AT Proxy): This provides the link to Modem to allow to use AT commands through a virtual com port.

Troubleshooting Errors

Device is not recognized at all

These drivers are only for Intel® devices. If you’re using a device from one of our OEM, please get the drivers directly from their web site, or you can use this list of drivers on the Android* site.

Errors in the Windows* Device Manager

Open Windows Device Manager:

Device Driver Update

  • If USB Mass Storage is visible instead of ADB Device, then right click on the Mass Storage device icon and select ‘Uninstall’.
    Then unplug your device from the computer and install drivers’ setup again.
  • If Android Device is visible with a yellow warning icon, then right click on the Android Device icon and select ‘Uninstall’.
    Then unplug your device from the computer and install drivers’ setup again.

Portable Device but no Android Debug Bridge (ADB) profile

There may not be an enabled “USB Debugging” option. The developer options on a phone are hidden by default. Open the settings on a phone, and find the About section. Look through it until the 'Build number' entry is visible. Tap if five times in quick succession, and there should be a small dialog stating it’s now set to developer. Come back to Settings main menu and go into Developer Options, then enable USB Debugging.

Windows XP: When I activate MTP there is no pop-up to allow me to access phone file system or transfer media files.

MTP is not supported by default with Windows XP. You have to install Windows Media Player 10 or later.


Further Questions & Support

Download Drew Port Devices Driver Ed

For other troubleshooting support, post questions on the Forum for Android* Applications on Intel® Architecture