Datamax Printers Driver Download

The Mid-Range Printer. Find the Right Ribbon for your Datamax Barcode Printer. Download Center. M-4206 MK II - M-4210 MK II - M-4308 MK II. New M-Class Mark II Printers to Replace Older M-Class Models. Datamax announces the discontinuation of the M-4206, M-4208 and M-4306 printers effective July 1, 2008. Download drivers for the Datamax I-4208 Printer: datamax-o'neildriver.exe More info about the Datamax I-4208 Printer View all available parts, accessories, supplies, service contracts and spec sheets.

Most printers require that you install the latest printer driver so that the printer will work well. If you recently upgraded from an earlier version of Windows, your printer driver might work with the previous version but might not work well or at all with Windows 10. Also, if you've experienced power outages, computer viruses, or other problems, your printer driver might be damaged. Downloading and installing the latest printer driver can often resolve these problems. Here are several ways to do this.

Use Windows Update

Windows Update might find an updated version of your printer driver. To use it:

Datamax printers driver download windows 10

Select the Start button, then select Settings > Update & Security , and select Check for updates.

If Windows Update finds an updated driver, it will download and install it, and your printer will automatically use it.

Install software that came with your printer

If your printer came with a disc, it might contain software that can help you install drivers for your printer or check for driver updates.

Download and install the driver from the printer manufacturer’s website

Check your printer manufacturer’s support site. To find that, search the internet for the name of your printer manufacturer plus the word “support,” such as “HP support.”

Hp Printers Driver Download

Driver updates are often available in the “Drivers” section of a printer manufacturer’s website. Some support sites let you search for your printer model number directly. Locate and download the latest driver for your printer model, then follow the installation instructions on the manufacturer’s website.

Datamax Printers Driver Download Free

Most drivers are self-installing. After you download them, double-click (or double-tap) the file to begin installing it. Then follow these steps to remove and reinstall the printer.

  1. Select the Start button, then select Settings > Devices > Printers & scanners .

  2. Under Printers & scanners, find the printer, select it, and then select Remove device.

  3. After removing your printer, add it back by selecting Add a printer or scanner. Wait for your device to find nearby printers, choose the one you want, and then select Add device.

What to do if the driver doesn't install

Download

If you double-click the installation file and nothing happens, follow these steps:

  1. Select the Start button, then select Settings > Devices > Printers & scanners .

  2. On the right, under Related Settings, select Print server properties.

  3. On the Drivers tab, see if your printer listed. If it is, you’re all set.

  4. If you don’t see your printer listed, select Add, and in the Welcome to the Add Printer Driver Wizard, select Next.

  5. In the Processor Selection dialog box, select your device’s architecture, and then select Next.

  6. In the Printer Driver Selection dialog box, on the left, select your printer manufacturer, on the right, select your printer driver, select Next, select Finish, and follow the instructions to add your driver.

  7. Follow the instructions in the section above to remove and reinstall the printer.

Connect the printer to your network

  1. Connect an network cable to the Ethernet port on the back of the printer. Connect the other end of the network cable into your network switch or hub.
  2. Turn the printer on using the power switch.
  3. On the front cover of the printer is an X button. The rear panel of the printer has a small circular button next to the Ethernet port. Simultaneously press the X button and small circular button and then release. This prints a system report.
  4. The system report contains the IP address of the printer.
    • If the IP address is not 0.0.0.0, then the printer was able to obtain an IP address from your DHCP server. Proceed to the next section.
    • If the IP address is 0.0.0.0, then the printer was not able to obtain an IP address from your DHCP server due to an issue on your network. Pitney Bowes cannot assist with this part of the setup. Contact your IT department for assistance.

Datamax Printers Driver Downloads

Datamax printer driver download

Datamax Printers Driver Download Windows 7

Configuring for Static IP

Only perform these steps if your network requires static IP assignments. If your network does not require static IP assignments, proceed to the next section.

  1. Open a new web browser tab.
  2. In the address bar, enter the IP address found on the printer report you printed earlier.
  3. On the Datamax O'Neil configuration page, expand Advanced.
  4. Expand Communication.
  5. Select Ethernet.
  6. Change DHCP Enabled to False.
  7. Enter the Static IP information.
  8. Select Save Settings.

Install the printer driver and set it up on the network

  1. Download the Windows printer driver. This driver supports both 32-bit and 64-bit versions of Windows.
  2. Go to your Downloads folder and double-click on do_<version>_M-0.
  3. If a security warning appears, select Run.
  4. Select I accept the terms of the license agreement and select Next.
  5. When prompted to choose an installation directory, if this is a new installation, use the default of C:Seagull. If this is not a new installation, change the directory to C:Seagull2 to create a new directory. Select Next.
  6. Uncheck Read installation instructions and select Finish.
  7. If prompted Do you want to allow this app to make changes to your PC, select Yes.
  8. The Welcome to the Seagull Driver Wizard box should appear. If it does not appear, open the installation directory from step 5 and double-click on DriverWizard.
  9. Select Install printer drivers and select Next.
  10. When prompted How is this printer going to be attached, select Network (Ethernet or WiFi) and select Next.
  11. Select Datamax-O’Neil as the manufacturer, then Datamax-O’Neil w1110 as the printer model and select Next.
  12. Select Create Port and choose Standard TCP/IP Port.
  13. Select New Port.
  14. Select Next.
  15. Enter the IP address of the printer in the Printer Name and IP Address field. The Port Name is filled in with the same information.
  16. Select Next.
  17. Choose Standard Generic Network Card as the Device Type and select Next.
  18. Select Finish.
  19. Locate and select the new port you just created (the IP address of the printer). Select Next.
  20. Select Next.
  21. Select Finish.